This convenient Denali lighting kit combines several high-quality Denali components including a wiring harness, light mount, and lights. It's designed to give you everything you need to equip your machine with an improved lighting setup and illuminate your riding experience.

Kit contains:

1x DENALI CANSMART GEN2 CONTROL - BMW (SKU: DEDNLWHS11602)

1x DENALI AUX LIGHT MOUNT BRKTS BMW R1250GSA '19- (SKU: DELAH0711101)

1x DENALI FENDER MNT DM/D2 LIGHTS [FITS M5, M6 +FENDER MNT BLK] (SKU: DELAH0010700B)

2x DENALI S4 LED LIGHT POD - DATADIM™ TECHNOLOGY - SINGLE (DEDNLS4050)

2x DENALI D7 LED LIGHT POD - DATADIM™ TECHNOLOGY - SINGLE (DEDNLD7050)

 

DENALI CANSMART GEN2 CONTROL details:

Harness the flexibility and intelligence of your BMW motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW's existing handlebar switches or the CANsmart™ Accessory Manager Software.

The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliary brake light.

Gen II - More Features, More Power, More Versatile

Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal.

Features:

• High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches.
• Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists.
• Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
• Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
• Inverse Flashing With Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during roadside emergencies.
• Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
• Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
• Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real-time to activate your brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
• Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
• Circuit Function Selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop down menu and make your selection from the list of available circuit functions.
• Switched Power Source - The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
• Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
• On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

What’s In The Box?

• CANsmart™ Controller
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb Horn Extension Cable
• B6 Brake Light Wiring Adapter
• Zip-ties
• Adhesive Hook-and-Loop Fastener
• Micro USB Programming Cable

 

DENALI AUX LIGHT MOUNT BRKTS BMW R1250GSA '19- details:

The DENALI light mount for BMW R1250GS Adventure provides a secure foundation for the addition of auxiliary lighting. Laser-cut steel construction is powder coated in an attractive matte black finish for improved durability and corrosion resistance. This high-quality mount fits precisely on the R1250GS Adventure utilizing the mirror mounting location and accepts any DENALI lighting kit. No drilling, cutting or any other modifications required for proper fitment. Be prepared for any adventure on your BMW with a set of auxiliary lights and this light mount from DENALI!

Features:

• Precision laser cut steel bracket
• Attractive powder coated black finish enhances corrosion resistance & durability
• Utilizes factory original mounting points without modifications
• Provides a secure foundation for mounting auxiliary lights
• Positions auxiliary lights inboard of the crashbars
• Compatible with any DENALI auxiliary lighting kit
• Designed and engineered in the USA

What's in the box:

• 1x DENALI light mount for BMW R1250GS Adventure
• 1x Mounting hardware
• 1x Installation instructions

 

1x DENALI FENDER MNT DM/D2 LIGHTS [FITS M5, M6 +FENDER MNT BLK] details:

This single point mount positions our smaller lights on the front fender to create the most low profile mounting option. This mount is compatible with our DM and D2 light pods.

 

 

DENALI S4 LED LIGHT POD - DATADIM™ TECHNOLOGY - SINGLE details:

The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced, the S4 provides more light per dollar than just about anything else on the market. The new S-Series was specifically engineered to reduce cost without sacrificing performance, quality or durability. In fact, the S4 features the same high-intensity LEDs as the D-Series lights, but utilises a single-piece optic and sealed beam construction to reduce the number of components. The result is a durable high-performance light that won't break the bank.

The DENALI S4's fixed lens features two flood optics and two spot optics to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. Consistent with D-Series lights, the S4 features DENALI’s innovative DataDim™ Technology that enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.

Features: 

• High-Intens ity Series Cree LEDs outputting 7665 lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

Specifications:

• LEDs: (4) 7-Watt Cree XPL HI
• Power Draw: 2.3 Amps
• Beam Distance: 375 Feet
• Beam Width: 75 Feet
• Raw Lumens: 3066
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.75in square x 1.97in deep
• IP67 Waterproof & Submersible

 

What’s In The Box?

• 1x LED Light Pod
• 1x Hinge Mounts with M8 Stainless Steel Hardware
• 2x Zip Ties and 1x Adhesive Mounting Square

 

DENALI D7 LED LIGHT POD - DATADIM™ TECHNOLOGY - SINGLE details:

At over 15,000 lumens, the DENALI D7 light kit is one of the brightest LED lights under 4.5 inches period. A pair of D7s feature 14 high-intensity, 10-watt LEDs that are focused through a proprietary single-piece optic specifically engineered to create a full bodied spot beam that can reach over 1500ft at an intensity of 1.0 lux. A pair of D7s will outshine 14 D2 lights and produces more than twice the light output of the D4. Not only are the new D7s incredibly bright, but they're strong, too. The robust heatsink and Active Thermal Management work together to keep this high-powered lamp cool enough to maintain maximum light output when you need it most.

Because the new D7 has so much power, there's no need for a selection of optics. The standard optic set benefits from the raw power of this array to have best-in-class spot coverage at a distance, perfect for picking out wildlife way beyond the range of your motorcycle's normal high beam. With lumens to spare, the D7's optics were designed to preserve a near-flood-beam pattern, resulting in an amazingly wide (200ft) beam that helps illuminate the sides of the road. In a way, the combination of incredible intensity and optics that are neither too distance-focused or flood-oriented is the best of both worlds.

In other ways, the D7 lights follow DENALI's reputation for innovative features. The D7 features DENALI’s DataDim™ Technology, which enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.

Features:

• Comprehensive LED light kit specifically designed for powersports applications
• High-Intensity Series Cree LEDs outputting 2190 lumens per kit
• DataDim™ equipped light pods and harness allow plug-n-play connection to the DataDim™ dimming controller
• Premium powersports harness with waterproof switch and handlebar switch mount included
• Plug-and-play installation. No wire cutting or splicing required.
• DrySeal™ Submersible Waterproof light and switch housings can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless-steel hardware included

Specifications:

• LEDs: (7) 10 Watt Cree XPL HI
• Power Draw: 5 Amps
• Beam Distance: 1275ft
• Beam Width: 125ft
• Raw Lumens: 7665
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 4.4in Round x 3.9in Deep
• IP67 Waterproof & Submersible

What's In The Box?

• 1x LED light pod
• 1x Hinge mount with M8 stainless-steel hardware
• 1x 4in wiring pigtail
• 2x Zip ties
• 1x adhesive mounting square